-
ergocar_basic_mainpict.jpg (194.62 kB)
- stable, solid aluminum design
- excellent stability (load capacity up to 80 kg)
- first-rate manufacturing quality
- surfaces designed for easy disinfection
- easy to maneuver due to twin casters
- intelligent cable management
- dual duct system for data cables and power cables
- individual color variants
- wide range of expansion options
Equipment carts
ergocar basic
- stable, solid aluminum design
- excellent stability (load capacity up to 80 kg)
- first-rate manufacturing quality
- surfaces designed for easy disinfection
- easy to maneuver due to twin casters
- intelligent cable management
- dual duct system for data cables and power cables
- individual color variants
- wide range of expansion options
Details
The base, support column and shelves are made of aluminum with high-end, hygienic and scratch-resistant powder coating.
The elaborate design offers a total load capacity of 80 kg in spite of its low own weight.
The spacious support column keeps the cables for data and for power supply in separate ducts. The covers of the two cable ducts can be folded away laterally for easy wiring of components. Flexible brushes protect cables and connectors at any exit point in the support column.
Drill holes in a 30 mm grid enable the individual positioning of components – expansions can be attached on the outside of the column at any height.
All shelves are elaborately manufactured of cast aluminum with a powder coating and can support loads of up to 20 kg (surface load).
The shelf width is designed to easily accommodate a standard keyboard. Convenient grip handles for easy moving of the equipment cart are available in various designs and colors.
A special shelf without a raised front edge makes it easy to pull out and refill the paper tray of printers.
If the ergocar equipment cart is used with a conventional ECG recorder, the paper printouts (DIN A4 or DIN A5 landscape format, Z-fold paper) are reliably captured in the specially designed shelves.
All drawers of the ergocar series are equipped with a soft self-closing mechanism. A variant with a cable outlet above the front panel is available for applications with wired probes (e.g., CTG) – this prevents crushing the probe cable when closing the drawer.
Storage baskets in various sizes can be attached on both sides of the column or laterally to shelves and drawers.
Storage baskets in various sizes can be attached on both sides of the column or laterally to shelves and drawers.
The compact keyboard tray is mounted below the top shelf. If the equipment cart is in mobile use, a standard keyboard can easily slide under the shelf. The mouse pad, also designed as a pull-out, can be mounted on the right or left side.
The PC bracket allows for attaching a PC with a so-called SFF (small form factor) housing directly underneath a shelf. A bracket for mounting on the outside of the central column is available for larger computers (desktop housing) (see Options/Accessories).
A universal bracket on the outside of the equipment cart column enables the secure attachment of desktop PCs.
Metal mouse pads can be attached to all shelves and drawers – either on the right or left.
From a simple 19" TFT monitor to a dual monitor system with two 24" TFT monitors—the modular monitor brackets of the ergocar system with standardized VESA mounting panels in various sizes are always the right solution.
A wide range of power strips (3 outlets, 6 outlets) in various national variants (EU, UK, Switzerland, USA) can be mounted in the power supply duct of the main column—either with or without a central on/off switch.
Medical isolating transformers for reducing leakage currents are available in different configurations (4 A, 5 A, 6 A) and are installed in the cart base to save space. In addition, extensions for RS-232, USB and LAN cables can be run from the data cable duct to the backside of the isolation transformer housing.
With the help of special brackets for gas cylinders (2 L or 10 L), the ergocar can be expanded to a full-fledged ergospirometry workstation.
Universal rails for commercially available accessories are available in various lengths and can be attached to the outside of the column at any height.
Adapters for the extension arms and brackets for the suction pumps are available for all commercially available suction electrode systems (Strässle, Quickels, custo med, Unisog, GE KISS).
The handles and cover are available in various colors.
(Color samples shown here are not binding and may display differently on individual monitors).
Options/accessories
-
System components
ergocar handle (outer side)
- Color code for handle color to be specified on order!
Part number : erg171.205
Equipment tray (with handle)
- Color code for handle color to be specified on order!
Part number : erg171.211
Securing plate, universal, for data channel
- e.g., for ECG module
Part number : erg171.304
Basket, large
- for mounting at the front
- length 480 mm, depth 220 mm, height 140 mm
Part number : erg171.226
Basket, large
- for mounting at the back
- length 480 mm, depth 220 mm, height 140 mm
Part number : erg171.227
Basket, small, for equipment tray
- for mounting on the side
- length 340 mm, depth 120 mm, height 90 mm
Part number : erg171.224
Basket, small, for drawer
- for mounting on the side
- length 340 mm, depth 120 mm, height 90 mm
Part number : erg171.225
PC bracket for SFF PC (under board)
- for PCs in SFF housing (small form factor)
Part number : erg171.317
Drawer with cable outlet (with handle)
- Color code for handle color to be specified on order!
Part number : erg171.223
Drawer, standard (with handle)
- Color code for handle color to be specified on order!
Part number : erg171.221
-
Monitor holders
TFT bracket, double
- for screen diagonal greater than 19"
- up to 16 kg
- Vesa 75/100
Part number : erg171.244
-
Power supply
Power cord Switzerland, angled, 1 m
- plug T12 / socket C13
- angled plug
- length: 1 m
- for power strip Switzerland (erg171.287 / erg171.288)
Part number : erg705.915
Isolating transformer 4A / IEC 60601
- incl. power strip, 6 outlets
- central switch
To be specified on order (cannot be added later on)!
Part number : erg171.290
Isolating transformer 4A / IEC 60601
- with USB, LAN, RS232 extension
- incl. power strip, 6 outlets
- central switch
To be specified on order (cannot be added later on)!
Part number : erg171.291
Additional power strips
erg171.282 * power strip, 4 outlets, with central switch (CEE7) erg171.284 * power strip, 6 outlets, with central switch (CEE7) erg171.286 * power strip, 11 outlets, with central switch (US) erg171.288 power strip, 8 outlets, with central switch (Switzerland)
requires angled power cord erg705.915* To be specified on order (cannot be added later on)! Part number : erg171.XXX
Additional isolating transformers
erg171.295 * isolating transformer 5A / IEC 60601
(incl. power strip, 6 outlets / central switch)erg171.296 * isolating transformer 5A / IEC 60601 with USB, LAN, RS232 extension (without galvanic isolation)
(incl. power strip, 6 outlets / central switch)erg171.293 * isolating transformer 6A / IEC 60601
(incl. power strip, 6 outlets / central switch)erg171.294 * isolating transformer 6A / IEC 60601 with USB, LAN, RS232 extension (without galvanic isolation)
(incl. power strip, 6 outlets / central switch)on request isolating transformer 110V / 10A / IEC 60601 with USB, LAN, RS232 extension
(incl. power strip, 6 outlets / central switch)* To be specified on order (cannot be added later on)! Part number : erg171.YYY
-
Medical accessories
Adapter for GE-KISS suction system
- requires monitor stand (erg171.240)
Part number : erg171.263
Adapter for UNISOG suction system
- requires monitor stand (erg171.240)
Part number : erg171.261
Retaining clip for articulated arm (10 mm) for universal rail
Part number : erg171.274
Support for STRÄSSLE DT100 pump (external)
- mounted on back of support column
Part number : erg171.270
Support for STRÄSSLE DT80 pump (external)
- mounted on back of support column
Part number : erg171.269
Support for UNISOG pump with bracket (external)
- mounted on back of support column
Part number : erg171.312
PC bracket, external (for mini tower PC)
dimensions mini tower-PC: depth 45 cm, width 16 to 21 cm, height 35 to 50 cm
Part number : erg171.302
Additional views
Technical details
Product Information
Dimensions and weight
ergocar basic
| Length: | 60 cm |
| Width: | 60 cm |
| Height: | 90 cm |
| Weight: | approx. 45 kg |
ergocar basic with packaging
| Length: | 68 cm |
| Width: | 70 cm |
| Height: | 100 cm |
| Weight: | approx. 67 kg |
User manual and downloads
The user manual, documents, software and technical specifications can be downloaded here – free of charge.
Show more content
Questions about the product
Do you have questions about our products?
We look forward to receiving your calls
telephone +49 7431 9894 0
or your mail message